Our movable partition walls with aluminum frame have the most widespread application. The partition is constituted by a set of flat panel whose width ranges from 600mm (approximately 23") to 1200mm (approximately 47"). The panel is provided with various specifications and characteristics to satisfy most requirements of design and budget. Its thickness can be 65mm (2.6"), 80mm (3") or 100mm (4"). Additionally, each model comes with different grades of sound insulation as well as single or paired hinges.
How Our Product Works
The panel is designed in tongue-and-groove mode and its surface finish can be made of precise laminated board, pre-finished wood veneer, fabric or other materials specified by customers. The movable partition wall is also equipped with vertical and horizontal external frame fabricated by extruded aluminum profiles. The retractable vinyl pressure seals installed on the top and bottom of panel can tightly seal the gaps between the panel and the top and bottom tracks, helping to form a sealed and balanced wall which blocks the propagation of sound wave. The sound insulation effect can reach up to 35 to 58 dB.
What's more, we design a simple lock-up configuration. The dismountable operating handle enabling a 180° rotation controls the extrusion and retraction of retractable pressure seals.
1. Retractable Pressure Seals
2. Telescopic Panel
3. Rubber Sealing Strip
4. Panel Sealing
There will be a 20-25mm gap between the top of panels and the bottom of the head track when the wall panels are moved. Similarly, the gap also exists between the bottom of panels and the floor.
By installing the retractable pressure seals on the top and bottom of panels, excellent sound insulation effect is achieved when the panels are positioned.
The pressure seals are operated by a dismountable handle enabling a 180° rotation to realize the extrusion and retraction.
The overall sound insulation effect can be achieved via the extension sleeve on the last panel and the tight sealing of the top and bottom seals.
|Telescopic panel||Top and bottom|
|Operation 3||Operation 4|
The decorative finishes shown are standard models and we also provide other types of finish, such as the natural wood veneer, wall covering, etc. Please contact us for more detailed information.
The color of our movable partition wall is unable to be completely reproduced on computer monitor except on the special calibrated equipment. Therefore, the color of finished product may be a little different from that shown on your computer screen.
1. The wall panel is of double skin construction with a solid external aluminum frame.
2. The panel faces are not fixed to the frame via hard contact and therefore when sound waves impact one side of the panel, the vibration caused will not be not directly transferred to the opposite panel face.
3. The aluminum frame of the partition wall is either concealed or exposed to create a flat and smooth edge.
4. The heavy-duty rubber sealing strips installed on the panel can ensure an optimal sound insulation effect.
5. By applying rubberized bitumen membranes and mineral wool insulation to the inside of panel, high-level sound insulation effect is achieved.
6. The quickly available mechanism controlling the retractable seals can exert sufficient pressure to the seals to realize sound insulation.
7. The retractable seals enable the tolerance of deviations in floor level as well as the deflections of supporting structures, and the tolerance limit depends on respective case.
Panels with double rollers can be stacked in a variety of positions. For panels with a single roller, the parking on one or both sides of the openning is available.
Our partition wall is provided with 4 options of panel, namely the 65 type, 80 type, 100 type, 125 type (ultra-high type). The 65 and 80 types come with aluminum frame, while the 100 type is provided with concealed frame. The thickness of the 4 types of panel is respectively 65mm, 80mm, 100mm and 125mm. The height and width of our product as well as the surface finishing can be custom.
The partition wall has 2 suspension modes including the single roller suspension and double roller suspension. Each suspension is different in stacking.
|Type||65 type||80 type||100 type and 125 type|
|Panel suspension||Top hung only||Top hung only||Top hung only|
|Track system||Single or twin point||Single or twin point||Single or twin point|
|Panel thickness||65mm||80mm||100mm, 125mm|
|Panel height||The maximum height reaches up to 4000mm. Please consult our Technical Department if the height is more than 3000mm.||The maximum height reaches up to 6000mm. Please consult our Technical Department if the height is more than 6000mm. The inset pass door is above 2400mm. The full height pass door reaches up to 3000mm.|
|Maximum height||4000mm with heavy duty track||6000mm with heavy duty track||18000mm with heavy duty track or steel track|
|Frame construction||Aluminum or steel||Aluminum or steel||Aluminum or steel|
|Fire safety||Optional Class I or O||Optional Class I or O||Optional Class I or O|
|Vertical profiles||Anodised aluminum with sealing profiles and painting is optional.||Anodised aluminum with sealing profiles and painting is optional.||Anodised aluminum with sealing profiles and painting is optional.|
|Retractable seals||Aluminium,black, with double rubber seals||Aluminium,black, with double rubber seals||Aluminium,black, with double rubber seals|
|Operation of seals||Manual operation with supplied operating handle.||Manual operation with supplied operating handle.||Manual operation with supplied operating handle.|
|Locking||Optional lock to pass doors||Optional lock to pass doors||Optional lock to pass doors|
|Pass doors||Single open in a panel or double open in two panels.||Single open in a panel or double open in two panels.||Single open in a panel or double open in two panels.|
|Sound insulation||40, 44, 47, 50 Rw dB||40, 44, 47, 50, 53 Rw dB||40, 44, 47, 50, 53, 58 Rw dB|
|Weight||Approximately 33-40kg/m2||Approximately 43-50kg/m2||Approximately 63-70kg/m2|